UA-135914120-1
The ALto Monitor PA Processor is really efficient for PA monitor. It is based on many years of experience and is designed to provide studio engineer and sound
contractor with a precise equalization. It can be used to modify the frequency "contour" of a sound, eliminate the unwanted
frequencies and suppress the feedback well.
PA / Monitor EQ / Feedback Eliminator
TECH INFORMATION
An analogue EQ designed for PA and Monitor application
15 - band 2 / 3 Octave Graphic EQ, switchable +/- 6dB or +/- 12dB
Two notch filters to reduce unwanted feedback frequencies, with frequency and cut controls
Lo - pass & Hi - pass 12dB / Oct. filters to reduce unwanted sounds and noises
Balanced Inputs / Outputs XLR & 1 / 4" TRS jack
Dimensions (WxDxH): 483 x 194.1 x 44mm (19" x 7.6" x 1.7")
Weight: 2.8kg (6.2 lb)
Control range 6dB or 12dB selectable
Bypass function
Switchable Hi - pass and Low - pass filters.
Balanced XLR, 1 / 4" TRS and RCA input and output connectors
Signal clip LED
Ground "LIFT" switch to disconnect signal ground from chassis ground
Line voltage selectable (115V / 230V)
Control Range: +/-6dB or 12dB selectable
Inputs and Outputs: XLR, 1 / 4" TRS and RCA jack
Inputs Impedance: 20K ohm (bal) 15K ohm (unbal)
Outputs Impedance: < 600 ohm
High Pass Filter: 40Hz (12dB/oct)
Low Pass Filter: 16kHz (12dB/oct)
Max. Input Level: +18dBV
Max. Output Level: +16dBV
THD%: 0.02% (at 1kHz, all slider at center)
Frequency Response: 20Hz to 50kHz, 3dB (all slider at center)
S / N Ratio: 117dB
Power Supply: AC 100V - 120V, 60Hz / AC 200V - 240V, 50Hz
Power Consumption: 15 watts (max)